About Bosch Pilot Ignition 10P & 16P
The Bosch Pilot Ignition Continuous flow range of gas hot water heaters are ideal for a small home or unit with 1-2 bathrooms.
These compact hot water heaters are designed for external installation only, with two options available – the Bosch Pilot Ignition 10P and 16P.
If you’d like to know more about the efficient and reliable Bosch Pilot Ignition 10P or 16P then keep reading, or call Jim’s Plumbing for expert advice on all of your hot water heating requirements.
When you call Jim’s Plumbing we will dispatch a local plumber to your location to provide you with professional guidance on the perfect hot water heater to suit your home or office.
We have a hot water plumber available near you right NOW!
No matter if you reside in Adelaide, Melbourne, Perth, Brisbane, Sydney or Canberra.
A fully qualified and insured Jim’s plumber is ready and waiting to assist 24 hours of the day, 7 days a week, including all public holidays.
Should you find yourself in a hot water emergency – no hot water, a burst hot water tank or your hot water heater pilot light won’t stay lit then call us for our prompt one hour* emergency plumbing service regardless the time of the day or night.
If a replacement or new hot water system is what you’re after but you’re worried about the cost – don’t be!
At Jim’s Plumbing we understand that everyone’s financial situation is different.
We also understand how important hot water is to every home and office in Australia which is why we proudly offer our customers the choice of interest free payment plans* if required.
See more about the Bosch Pilot Ignition range below:
Bosch Pilot Ignition 10P
The externally installed Bosch Pilot Ignition 10P delivers 10 litres of water per minute at a 25°C rise, making it ideal for a small home or unit with 1 bathroom.
Featuring continuous flow technology you are guaranteed to have a reliable flow of hot water 24/7.
The Bosch 10P operates on natural gas or LPG and features an efficient 4.6 energy star rating and ample warranties.
If you’d like to discuss with a hot water expert;
- if the Bosch 10P would be suitable for your home or unit
- if you currently own a Bosch 10P that requires a repair or service
then call in a local plumber from Jim’s Plumbing covering all metropolitan areas of Adelaide, Melbourne, Canberra, Perth, Brisbane or Sydney 24/7.
The Bosch Pilot Ignition 10P specifications are below:
| Part No. | TF250 | Fuel Type | Natural Gas/LPG |
| Installation Type | External only | Height of Unit | 845mm |
| Ignition Type | Pilot | Width of Unit | 405mm |
| Water Flow Rate | 10 L/min at a 25°C rise | Depth of Unit | 265mm |
| Suitable for | 1 bathroom | Weight of Unit | 21kg (in box) |
| Minimum water inlet pressure | 30 (kPa) | Warranty | |
| Minimum constant water pressure to obtain max. flow | 90 – Natural Gas 55 – LP Gas | Parts & Labour | 2 yrs. |
| Maximum water inlet pressure | 1200 (kPa) | Heat Exchanger | 10 yrs. (part only) |
| Mj/hour | 82 | Pipe Connection Size | 20mm ¾” Natural Gas 15mm ½” LPG |
| Energy Efficiency | 4.6 star rating | Cold Water Pipe | 15mm ½” |
| Minimum flow rate | 5 L/min | Hot Water Pipe | 15mm ½” |
Bosch Pilot Ignition 16P
For a slightly larger home or unit featuring 1-2 bathrooms the Bosch Pilot Ignition 16P will provide a constant flow of steamy hot water through its advanced continuous flow technology.
Designed for external installation the Bosch 16P is only suitable to operate with Natural Gas.
This economical unit features an energy star rating of 4.3 and delivers a water flow rate of 16 litres per minute with a 25°C temperature rise.
For a quote on the supply and new installation of a Bosch Pilot Ignition 16P, or to have your existing 16P repaired or replaced, call the experts from Jim’s Plumbing for a reliable service at an affordable cost – available 24/7.
The Bosch Pilot Ignition 16P specifications are below:
| Bosch Pilot Ignition 16P | |||
| Part No. | TF400 | Fuel Type | Natural Gas only |
| Installation Type | External only | Height of Unit | 936mm |
| Ignition Type | Pilot | Width of Unit | 460mm |
| Water Flow Rate | 16 L/min at a 25°C rise | Depth of Unit | 265mm |
| Suitable for | Up to 2 bathrooms | Weight of Unit | 24kg (in box) |
| Minimum water inlet pressure | 50 (kPa) | Warranty | |
| Minimum constant water pressure to obtain max. flow | 150 – Natural Gas LP Gas – N/A | Parts & Labour | 2 yrs. |
| Maximum water inlet pressure | 1200 (kPa) | Heat Exchanger | 10 yrs. (part only) |
| Mj/hour | 130 | Pipe Connection Size | 20mm ¾” – Natural Gas N/A – LPG |
| Energy Efficiency | 4.3 star rating | Cold Water Pipe | 15mm ½” |
| Minimum flow rate | 2 L/min | Hot Water Pipe | 15mm ½” |
No Interest Ever!* Payment Plan Options Available
No Interest Ever!* payment plan options available on hot water heater replacements to help ease any financial stress this burden may cause. If your bosch hot water heater is leaking, or you have no hot water, we can often have a plumber to you within the hour*.
Choosing the Correct Hot Water System
Choosing the correct hot water system can be difficult, as there are so many options to choose from; Click on the links to find out more about these systems.
Gas
Solar
Electric
Heat Pump
Instantaneous
Gas boosted solar
Please be advised that we may have additional Bosch Hot Water System models available.
Simply book a plumber online now, or phone 1300 133 509 to book now.
*NO INTEREST EVER!* PAYMENT PLAN, “Fees, terms and conditions apply”.
No Interest Ever!* Payment Plan offered through Certegy Ezi-Pay Express. No Interest Ever on your hot water heater replacement or new supply and installation, gas service, water service or drain replacement. Conditions apply.
Information on this page is subject to change. Commercial hot water systems also available on enquiry.
*Conditions apply.