Rinnai Continuous Flow Hot Water Heater Fault or Error Code (No Code) Troubleshooting Guide
If a fault occurs with your Rinnai continuous flow hot water heater an error code will flash on the hot water temperature controller to show the fault in question.
This handy self-diagnostic tool will allow you, or your service technician, to quickly and easily see what is causing the problem with your hot water system to provide for a prompt repair – saving you time and money.
These fault codes will display on all Rinnai Infinity continuous flow hot water systems with temperature controller remotes installed – models being:
Infinity 26 Touch
Infinity 26i (internal)
Infinity Enviro 26
Infinity Enviro 32
One of the fault codes that may display on the Rinnai digital status monitor is a – (dash) or ‘no code’.
What does a Rinnai error code (no code) signify?
If a – (dash) or ‘no code’ is flashing on your temperature controller this indicates that there is a noticeable reduction in water flow. In most instances your Rinnai hot water heater will cease to work and the inlet water filter will need to be cleaned to rectify the issue.
You can attempt to clear any Rinnai fault code yourself by turning the hot water tap on and off and also by pressing the temperature controller on/off button off and then on again. If the Rinnai fault code – (no code) remains, or is removed only to return again later, then you will require the services of a fully qualified technician to resolve this error.
Rinnai hot water error code repairs 24/7
For a fully qualified Rinnai hot water expert call the professional plumbers from Jim’s Plumbing. Our team of plumbers are all highly proficient in all Rinnai hot water fault codes and can quickly rectify the error code issue with a reliable and affordable repair.
We have a local plumber close to you across all metropolitan areas of Adelaide, Melbourne, Perth, Sydney, Brisbane and Canberra no matter the time of the day or night. Our fully qualified and insured plumbers are on-call 24 hours a day, 7 days a week, including all public holidays.
If you have no hot water then call us anytime on 1300 133 509. Your attending plumber from Jim’s will know exactly how to resolve your Rinnai fault code – (no code) to have your hot water back up and running again in no time.
Rinnai fault code – (no code) troubleshooting
Your attending local plumber from Jim’s Plumbing will inspect your Rinnai hot water heater to ensure that the water lines were initially installed correctly (if your hot water heater was only recently installed). The water inlet filter will be cleaned and the minimum flow rate required to fire the unit will be checked and rectified if required. During the inspection the system will also be checked for any bleed overs.
At Jim’s Plumbing we believe in doing the job correctly first time, every time – without the need for any pesky call backs.
Your Rinnai hot water error code – (no code) will be repaired in the shortest time possible when you call a local, friendly and affordable plumber from Jim’s Plumbing.
We’re available 24/7 with a same day service guarantee, or within the hour* in a gas or plumbing emergency.
No Interest Ever!* Payment Plan Options Available
No Interest Ever!* payment plan options available on hot water heater replacements to help ease any financial stress this burden may cause. If your rinnai hot water heater is leaking, or you have no hot water, we can often have a plumber to you within the hour*.
*NO INTEREST EVER!* PAYMENT PLAN, “Fees, terms and conditions apply”.
No Interest Ever!* Payment Plan offered through Certegy Ezi-Pay Express. No Interest Ever on your hot water heater replacement or new supply and installation, gas service, water service or drain replacement. Conditions apply.
Information on this page is subject to change. Commercial hot water systems also available on enquiry.