Rinnai Continuous Flow Hot Water Heater Fault or Error Code 32 Troubleshooting Guide
The Rinnai continuous flow hot water heater Infinity range is incorporated with a diagnostic tool that allows you to quickly and easily see if any issues are affecting your hot water system.
This feature is available on the Rinnai Infinity models; 16, 20, 26, 26 Touch, 26i, 32, Enviro 26 and the Enviro 32.
One of the Rinnai fault codes that may flash on your status or digital monitor is fault code 32.
Fault code 32 on your Rinnai continuous flow hot water system indicates that the outgoing water temperature sensor has become faulty.
You can attempt to clear the Rinnai error code 32 by simply turning the hot water tap off and then on again, if this doesn’t work try pushing the on/off button to off and then on.
If the Rinnai fault code 32 still remains after these steps then you will need to call a qualified technician to rectify the issue.
For a prompt, quality and affordable repair to rectify your Rinnai hot water fault code 32 call the experts from Jim’s Plumbing.
We’re available, ready and waiting to assist, across all metropolitan areas of Adelaide, Melbourne, Perth, Brisbane, Sydney and Canberra – regardless of the time of the day or night.
At Jim’s Plumbing, we guarantee a same day service and our lines are open 24 hours a day, 7 days a week for any emergency plumbing requirement – we even have plumbers available on public holidays.
We understand that plumbing and gas fitting emergencies don’t always happen between the hours of 9am-5pm which is why we are always available and in an emergency we can be knocking on your door within an hour* of your call.
Rinnai Fault Code 32 Troubleshooting
The Rinnai error code 32 is a sign of a fault with the outgoing water temperature thermistor. Your attending Jim’s plumber will inspect the systems thermistor wiring harness to check for any loose or damaged connections leading back to the PC board.
If there is no indication of a fault here the next step is to drain your hot water system down to allow for removal of the thermistor to check for any scale build up, which will be cleaned efficiently if found.
The resistant and meter readings will be checked and rectified if incorrect. If the Rinnai fault code 32 remains after these steps then the thermistor will be required to be replaced.
When you call Jim’s Plumbing in relation to a Rinnai fault code 32 you can trust that the error code will be rectified with our affordable and reliable plumbing service. We are the Rinnai hot water experts and building lasting and trusting relationships with our customers is our number one priority.
Should your Rinnai continuous flow hot water system be showing another error code, besides the fault code 32, please check our website for other Rinnai hot water code troubleshooting procedures.
No matter your hot water, plumbing or gas fitting requirements – the team from Jim’s Plumbing are here for you 24/7.
No Interest Ever!* Payment Plan Options Available
No Interest Ever!* payment plan options available on hot water heater replacements to help ease any financial stress this burden may cause. If your rinnai hot water heater is leaking, or you have no hot water, we can often have a plumber to you within the hour*.
Choosing the Correct Hot Water System
Choosing the correct hot water system can be difficult, as there are so many options to choose from; Click on the links to find out more about these systems.
Please be advised that we may have additional Rinnai Hot Water System models available.
*NO INTEREST EVER!* PAYMENT PLAN, “Fees, terms and conditions apply”.
No Interest Ever!* Payment Plan offered through Certegy Ezi-Pay Express. No Interest Ever on your hot water heater replacement or new supply and installation, gas service, water service or drain replacement. Conditions apply.
Information on this page is subject to change. Commercial hot water systems also available on enquiry.