Bosch Hot Water Heater Fault or Error Code E10 Troubleshooting Guide
No hot water? If you have a Bosch hot water heater installed check the display monitor of the temperature controller to see if an error code is flashing. This is a convenient feature of the Bosch hot water systems.
Should any fault occur within the unit the PC board will self-diagnose the fault and allow for a Bosch fault code to display. There are many different fault codes with each one representing a different issue.
The Bosch hot water error codes allow for an easy and accurate repair on your hot water heater as the issue is immediately known by the code that is displayed – greatly reducing investigation requirements and saving you time and money.
One of the Bosch codes that you may encounter is fault code E10.
What does the Bosch fault code E10 mean?
If an E10 error code is flashing on your Bosch hot water monitor this is an indication that there is a fault in relation to the heating element or a fault regarding the high limit safety cut-out.
The heating elements installed in your Bosch hot water heater are one of the hardest working parts. They allow for your hot water to be maintained at the ideal levels. A faulty, or burned out, heating element is usually the main cause for you to experience no hot water.
How to resolve a Bosch E10 error display
It is highly recommended to call a fully qualified technician to investigate and repair a Bosch fault code E10. Your hot water heater’s cover plate will need to be removed exposing high voltage wiring. Attempting a do-it-yourself repair could also void your appliance warranty.
At Jim’s Plumbing we understand that when you have no hot water you need a FAST and reliable hot water heater repair service. We don’t mess around, and will have a local plumber to your property on the very same day of your plumber booking.
Need a plumber on a public holiday, weekend or at 2am in the morning? Then call us anytime – our plumbing professionals are available 24 hours a day, 7 days a week, 365 days of the year. In a gas or plumbing emergency you will be pleased to know that our goal is to arrive at your location within only an hour of your booking, 24/7.
For a plumber in Adelaide, Melbourne, Perth, Sydney, Brisbane or Canberra, covering all metropolitan areas, call your local plumber from Jim’s. We will have the Bosch E10 fault code repaired on your hot water heater and have your hot water running hot again before you know it.
Our reliable and prompt plumbers will provide you with a quality service at an affordable price.
Call us today on 1300 133 509 (SA, VIC or WA) or 131 546 (QLD, NSW or ACT) or complete our easy online plumber booking form and we’ll call you back at no cost to you.
Don’t put up with no hot water, or a faulty hot water heater, any longer. Have the Bosch E10 fault code resolved TODAY by a friendly, fully qualified and licensed plumber from your local Jim’s Plumbing.
No Interest Ever!* Payment Plan Options Available
No Interest Ever!* payment plan options available on hot water heater replacements to help ease any financial stress this burden may cause. If your bosch hot water heater is leaking, or you have no hot water, we can often have a plumber to you within the hour*.
Choosing the Correct Hot Water System
Choosing the correct hot water system can be difficult, as there are so many options to choose from; Click on the links to find out more about these systems.
Please be advised that we may have additional Bosch Hot Water System models available.
*NO INTEREST EVER!* PAYMENT PLAN, “Fees, terms and conditions apply”.
No Interest Ever!* Payment Plan offered through Certegy Ezi-Pay Express. No Interest Ever on your hot water heater replacement or new supply and installation, gas service, water service or drain replacement. Conditions apply.
Information on this page is subject to change. Commercial hot water systems also available on enquiry.