Bosch Hot Water Heater Fault or Error Code E02 Troubleshooting Guide
The Bosch Compress 3000 heat pump hot water system is an advanced appliance that will use 65% less energy when compared with a conventional electric storage hot water heater.
In fact, the hot water heat pump is actually classed in the same category as a solar powered hot water system due it its extreme energy efficiency and has generous government rebates available.
The Bosch hot water heat pump has been built using award-winning technology and is ideal for any Australian climate being able to operate in temperatures from -7°C to 40°C.
Another advanced feature of the Bosch Compress 3000 heat pump hot water heater is its ability to self-diagnose any faults that may occur within the appliance.
The Bosch hot water heat pump is built durable but, like any household appliance, faults can occur during their lifetime. One of the Bosch codes that may display is fault code E02.
What does a Bosch fault code E02 mean?
The Bosch Compress 3000 heat pump has a top storage tank temperature sensor and a bottom storage tank temperature sensor installed. IF the E02 error code is displayed this is an indication that there is a fault in relation to the bottom storage tank temperature sensor.
The temperature sensors located in the storage tank assist with maintaining the ideal hot water temperature settings for the water being stored. Should a Bosch error code E02 show on your hot water heater you may also experience no hot water or hot water temperatures that are far too high.
As you can see, these fault codes make for an easy and convenient repair as your technician should be able to repair the hot water heater from the fault code indicator, rather than wasting time on unnecessary sections or parts of the appliance trying to troubleshoot the issue.
How to troubleshoot the Bosch E02 error code on your hot water system
In the event that an E02 fault code is displayed on your Bosch hot water heater you will require the services of a fully qualified technician to investigate and repair.
You can’t go wrong when you call the Bosch hot water plumbers from Jim’s Plumbing. We understand all facets of Bosch hot water systems and their fault code displays, including the E02 error code on the Compress 3000 heat pump.
We can provide a fast and affordable repair having your hot water back to normal and your Bosch hot water heater running at optimum performance once more. And, we can do all of this on the SAME DAY as your plumber booking. In a plumbing emergency we can even have a local plumber to your location within an hour* of you hanging up your phone from us.
If you need a plumber in Adelaide, Melbourne, Perth, Brisbane, Sydney or Canberra then call Jim’s Plumbing anytime of the day or night.
Our plumbers are available 24 hours a day, 7 days a week, including all public holidays.
To rectify the Bosch E02 hot water fault code call us TODAY for a quality service and customer satisfaction ensured.
No Interest Ever!* Payment Plan Options Available
No Interest Ever!* payment plan options available on hot water heater replacements to help ease any financial stress this burden may cause. If your bosch hot water heater is leaking, or you have no hot water, we can often have a plumber to you within the hour*.
Choosing the Correct Hot Water System
Choosing the correct hot water system can be difficult, as there are so many options to choose from; Click on the links to find out more about these systems.
Please be advised that we may have additional Bosch Hot Water System models available.
*NO INTEREST EVER!* PAYMENT PLAN, “Fees, terms and conditions apply”.
No Interest Ever!* Payment Plan offered through Certegy Ezi-Pay Express. No Interest Ever on your hot water heater replacement or new supply and installation, gas service, water service or drain replacement. Conditions apply.
Information on this page is subject to change. Commercial hot water systems also available on enquiry.