Bosch Electronic Highflow 17e

Jims Banner Special

About Bosch Highflow 17e

The Bosch Electronic Highflow 17e is a compact gas continuous flow hot water heater suitable for a small 1 bathroom home or unit, suited to run on either natural gas or LPG.

When it comes to Bosch you can trust that you have purchased a quality and durable hot water heater that is environmentally friendly.

Bosch hot water system

The Bosch Highflow 17e proves this with its high 6 star energy efficiency rating, continuous flow technology and comprehensive warranty of 3 years parts and labour and 10 years on the heat exchanger.

Bosch Electronic Highflow 17e

Do you require a Bosch Highflow 17e repair?

Or would you like a new Bosch hot water heater installation?

If you’re looking to install a Bosch Highflow 17e contact the team at Jim’s Plumbing. We can supply and install your new Bosch Highflow 17e with minimal downtime or fuss to you. Need a new hot water heater but don’t have the funds at the moment?

That’s no problem when you contact Jim’s Plumbing.

We understand that a hot water heater is usually the last thing that you were budgeting for which is why we offer our customers no interest EVER payment plans*.

Your hot water expert from Jim’s Plumbing will supply and install your new hot water heater, with only a small deposit required, and then you can make interest free payments going forward until the cost is paid off – easy!

Should you currently have a Bosch Highflow 17e installed that requires a repair or service then we will happily assist.

No matter the time of the day or night, we have a fully qualified and licensed local plumber on-call 24 hours a day, 7 days a week.

In a hot water emergency we strive to be at your location within an hour* of your call across all metropolitan suburbs of Adelaide, Melbourne, Perth, Brisbane, Sydney and Canberra.

Call us anytime on 1300 133 509 to book your reliable plumber from Jim’s Plumbing.

No Interest Ever!* Payment Plan Options Available

No Interest Ever!* payment plan options available on hot water heater replacements to help ease any financial stress this burden may cause. If your bosch hot water heater is leaking, or you have no hot water, we can often have a plumber to you within the hour*.

Why would the Bosch Highflow 17e continuous flow hot water system be right for me?

Bosch is one of the leading manufacturers when it comes to hot water heaters and they have designed a make and model of hot water heater to suit any home or office.

The Bosch Highflow 17e is ideal for a smaller home or unit with 1 bathroom and up to 2 residents.

The Bosch Highflow 17e is for external installation only but the small unit will not take up much space on an exterior wall. The modern design can easily be installed in a recess box for extra space-saving which provides a more aesthetically appealing look, with lockable and fully-enclosed options also available.

If you reside in a block of units and are concerned over theft of your hot water heater the Bosch Highflow 17e is also available with an optional security bracket to safely secure your appliance.

Another optional feature of the Bosch Highflow 17e is the temperature controllers. These are an excellent safety feature as they enable you to pre-set your desired hot water temperature to drastically reduce the risk of scalding. They provide the convenience of only needing to turn on one tap, rather than mixing the hot and cold taps to find your preferred water setting. They also feature an assistance call button and they provide a water saver/bath fill function which will automatically turn your tap off when your bath water has reached the set level.

If you’d like to know more about the Bosch Highflow 17e call Jim’s Plumbing on 1300 133 509 for professional advice to ensure this hot water heater will adequately suit your hot water heating demands.

At Jim’s Plumbing we have a reliable and local plumber close to your home or office available 24/7 across all metropolitan areas of Adelaide, Melbourne, Perth, Brisbane, Sydney and Canberra to have your hot water running hot again before you know it.

Product Specifications

Bosch Highflow 17e Specifications
Part No.YS1780RAH
External/Internal InstallationExternal Installation
Ignition typeElectric
Litres per minute (25°C rise)17
Suited to no. of bathrooms1
Minimum operating water inlet pressure100 kPa
Minimum constant water pressure for Maximum flow100 kPa
Maximum water inlet pressure1000 kPa
Energy Efficiency Star Rating6.30 Stars
Antifrost includedComes standard with unit
Solar Transfer ValveNo
50°C Limited Part No.YS1770RA5*
Applicable Gas TypeNatural Gas / LPG
Electrical Supply Required230 VAC – 240V 50 Hz (weatherproof power point of 10amp within 500 mm of the hot water system)
Optional Hot Water Temperature ControllersMaximum of 4 temperature controllers
Unit Height520 mm
Unit Width350 mm
Unit Depth170 mm
Box Weight18 Kg
Parts and Labour only3 Yrs
Heat Exchanger10 Yrs (part only)
Size of Pipe Connection  
Natural gas (mm)20 (3/4”)
LPG (mm)20 (3/4”)
Cold Water (mm)20 (3/4”)
Hot Water (mm)20 (3/4”)

Choosing the Correct Hot Water System

Choosing the correct hot water system can be difficult, as there are so many options to choose from; Click on the links to find out more about these systems.




Heat Pump


Gas boosted solar

Please be advised that we may have additional Bosch Hot Water System models available.

Simply book a plumber online now, or phone 1300 133 509 to book now.

*NO INTEREST EVER!* PAYMENT PLAN, “Fees, terms and conditions apply”.

No Interest Ever!* Payment Plan offered through Certegy Ezi-Pay Express. No Interest Ever on your hot water heater replacement or new supply and installation, gas service, water service or drain replacement. Conditions apply.

Information on this page is subject to change. Commercial hot water systems also available on enquiry.

*Conditions apply.