About Bosch Condensing C26
If you’re in the market for a highly efficient hot water heater to suit a home that has 2-3 bathrooms, then the Bosch Condensing C26 gas continuous flow hot water heater might well be suited for your needs.
Bosch has found a way to capture the heat that would normally be lost through exhaust gasses when using a standard continuous flow hot water system.
Delivering constant hot water to your property, as and when you need it, at a rate of 26 litres per minute with a rise of 25°C the Bosch Condensing C26 hot water system has been designed with advanced energy efficiency technology.
This heat is captured in a second heat exchanger situated within the unit and is then used to preheat the next flow of incoming cold water. This condensing technology makes this continuous flow hot water heater one of the most energy efficient on the market today.
The Bosch Condensing C26 has a 6.7 energy star efficiency rating
With climate change being a major focus within Australia, and with hot water heating being a main contributor to high greenhouse gas emissions, you can trust that you’ll be playing your part to a greater future when you install a Bosch Condensing C26 hot water system. You can also trust that your energy bills will be dramatically reduced (compared to an electric hot water heater) going forwards due to the systems extremely high 6.7 star energy efficiency rating.
The Bosch Condensing C26 hot water heater is designed for external installation only and can be installed within a recess box to allow for extra space-savings. With up to 4 premium hot water temperature controllers available with this unit you can easily pre-set your desired water temperature for different areas within your home which provides convenience as well as a safety aspect to greatly reduce the risk of hot water scalding to young children and the elderly.
No Interest Ever!* Payment Plan Options Available
No Interest Ever!* payment plan options available on hot water heater replacements to help ease any financial stress this burden may cause. If your bosch hot water heater is leaking, or you have no hot water, we can often have a plumber to you within the hour*.
No Interest EVER payment plans*
If the Bosch Condensing C26 continuous flow hot water heater sounds right for your hot water heating requirements then call in a professional and fully qualified plumber from Jim’s Plumbing.
Jim’s Plumbing has your gas and plumbing requirements covered across all metropolitan areas of Adelaide, Melbourne, Perth, Brisbane, Sydney and Canberra.
Our reliable, friendly and affordable plumbers are available 24 hours a day, 7 days a week, including all public holidays.
In a hot water plumbing emergency we can be knocking on your door within an hour of your call*.
If your current hot water heater has given up the ghost, you’d simply like to upgrade to a more energy efficient system, or you need a brand new hot water heater installed but hadn’t been banking on the cost that this could set you back then take advantage of the no interest EVER payment plans* available with Jim’s Plumbing.
A hot water heater is one of the most important appliances that you will need to purchase for your home and choosing the wrong system will only cause you future hassle. A hot water heater needs to be large enough to cater for your home or office’s hot water heating requirements.
The last thing you want is to be having continuous cold showers or extremely high energy bills due to your hot water heater having to work in over drive.
For expert advice and to see if the Bosch Condensing C26 is the best hot water system for your property call Jim’s Plumbing.
Call us today for all of your hot water heating requirements – hot water repairs, servicing, replacements and new installations 24/7.
Bosch Condensing C26 Specifications
|Part No.||BC2680RANG (55˚C Natural Gas)|
|Part No.||BC2680RALP (55 ˚C LP GAS)|
|Part No.||BC2680RA5NG (50 ˚C Locked Natural Gas)|
|Part No.||BC2680RA5LP (50 ˚C Locked LP Gas)|
|Energy Efficiency||6.7 star rating|
|Operating Pressure (kPa)||200-1000|
|Installation Type||External installation only|
|Ignition Type||Electric Ignition|
|Flow Rate||2.5 Litres per minute (at 20 ˚C inlet temp)|
|Unit Weight||18 kg|
|Inlet Water Temp||50 ˚C Maximum|
|Water Inlet (20mm)||R ¾|
|Gas Inlet (20mm)||R ¾|
|Outlet – Hot Water (20mm)||R ¾|
|Drain Outlet Condensation (15mm)||R ½|
|Power||230/240 VAC (50Hz)|
|Power Consumption||40.8W (standard)|
|Power Consumption||130W (Anti-freeze)|
|Warranty||3 years parts & labour + 10 Yrs heat exchanger (part only)|
|Gas Consumption (Natural Gas)||175 Max|
|Gas Consumption (LP Gas)||185 Max|
|Hot Water Temperature Controllers||Maximum of 4|
Choosing the Correct Hot Water System
Choosing the correct hot water system can be difficult, as there are so many options to choose from; Click on the links to find out more about these systems.
Please be advised that we may have additional Bosch Hot Water System models available.
*NO INTEREST EVER!* PAYMENT PLAN, “Fees, terms and conditions apply”.
No Interest Ever!* Payment Plan offered through Certegy Ezi-Pay Express. No Interest Ever on your hot water heater replacement or new supply and installation, gas service, water service or drain replacement. Conditions apply.
Information on this page is subject to change. Commercial hot water systems also available on enquiry.